WDV-PD Series

WDV-8-PD to 14” Coils (Considered Operator Handling - under 100 Pounds)

        ▪Standard Coil

        ▪Self Contained Controls for Magnetization and

            Demagnetization.

            ◦Adjustable Polarity (+/-)

            ◦Infinitely Variable Amperage

            ◦Continuous Reading Amp Meter

            ◦Energize Button Activation

        ▪Cast Feet (Supplementary Handles)

        ▪Upper ID Wear Bars (7 Bars)

        ▪Lower ID Wear Bars (7 Bars)

        ▪Calibration Certificate 

 WDV-16PD to 18” Coils (Considered Auxiliary Handling - over 200 Pounds)

        ▪Standard Coil

        ▪Self Contained Controls for Magnetization and Demagnetization.

            ◦Adjustable Polarity (+/-)

            ◦Infinitely Variable Amperage

           ◦Continuous Reading Amp Meter

            ◦Energize Button Activation

        ▪Cast Feet (Supplementary Handles)

        ▪Upper ID Wear Bars (7 Bars)

        ▪Lower ID Wear Bars (7 Bars)

        ▪Side ID Wear Bars (2)

       ▪Lifting Lug Assembly

        ▪Calibration Certificate 

WDV-25-PD  Coil (Considered Crane Handling - over 400 Pounds)

        ▪25" Coil with Connector

           ◦ Cable - Control Housing to Coil Housing.

           ◦ Cable - Control Housing to Mains

        ▪Upper Control Housing with Lifting Lug Assembly

        ▪Remote Control Housing for Demagnetization.

          ◦Adjustable Polarity (+/-)

          ◦Infinitely Variable Amperage (0 to 30 Amps)

          ◦Continuous Reading Amp Meter

◦Energize Button Activation

        ▪End and Centralizing Assembly for;  9, 12, 16, and 24” Pipe

        ▪Cast Feet (Supplementary Handles)

        ▪Upper ID Wear Bar Assembly (9 Bars)

        ▪Lower ID Wear Bars Assembly (9 Bars)

        ▪2 Side ID Wear Bars Assemblies (2 Bars each)

        ▪Calibration Certificate

        ▪ Operator Manual

        ▪Calibration Certificate 

 WDV-38-PD to 60”  Coil (Considered Crane Handling - over 600 Pounds)

        ▪Coil with Connector

           ◦ Cable - Control Housing to Coil Housing.

           ◦ Cable - Control Housing to Mains

        ▪Upper Control Housing with Lifting Lug Assembly

        ▪Remote Control Housing for Demagnetization.

          ◦Adjustable Polarity (+/-)

          ◦Infinitely Variable Amperage (0 to 30 Amps)

          ◦Continuous Reading Amp Meter

◦Energize Button Activation

        ▪End and Centralizing Assembly for 7 OD sizes

        ▪Cast Feet (Supplementary Handles)

        ▪Upper ID Wear Bar Assembly (11 Bars)

        ▪Lower ID Wear Bars Assembly (11 Bars)

        ▪4 Side ID Wear Bars Assemblies (3 Bars each)

        ▪Calibration Certificate

        ▪ Operator Manual

        ▪Calibration Certificate